The R3 · In-Building Pipe Assessment
Rehabilitation Readiness Report
The Assessment Behind an Accurate Rehabilitation Proposal
Not all pipe inspections are the same. When the question is whether your building is a candidate for trenchless rehabilitation, the inspection is not the deliverable. The scope it produces is.
What It Is
Readiness, Not a Verdict
A standard inspection says whether a pipe is in poor condition. It does not document what it takes to price a rehabilitation. The R3 closes that gap. Every variable required for an accurate proposal is documented before the proposal is written.
"Readiness" means the project is fully knowable. It is not a pass-or-fail verdict on the pipe. It is the documented scope that lets a rehabilitation be priced correctly the first time, with nothing assumed and nothing left for a change order.
The Five Critical Areas
- 01
Connection Locations
- 02
Verified Measurements
- 03
True Pipeline Conditions
- 04
Access Point Documentation
- 05
Site Access & Project Considerations
The Deliverable
What You Receive
Every R3 is delivered in your client portal with video, site photos, access point documentation, and the evidence behind every recommendation, completed by a nationally certified Building & Sewer Drain Inspector to NASSCO BSDI standards.
- Executive Summary
- Supporting Media Files
- Critical Areas Documentation
- Rehabilitation Recommendations
Who Inspects Your Pipe Matters
Three Inspections. Not the Same.
A Plumber's Inspection
Finds a problem and recommends action. Few, if any, details needed to scope a rehabilitation.
A Condition Assessment
Grades the pipe and documents its condition. Rarely captures access, connections, measurements, or logistics.
The Rehabilitation Readiness Report
Documents every variable needed to scope and price the job, by the expert who builds the proposal.
Side by Side
What Each One Actually Captures
The R3 is the standard behind every Southeast Services proposal, so your scope is never exposed to change orders built on missing information.
| Category | Plumbing InspectionTraditional General Plumber | R3Rehabilitation Readiness Report | Condition AssessmentInspection Specialist |
|---|---|---|---|
| Core Question Answered | What is causing the problem? | What is required to rehabilitate? | How bad is the problem? |
| Pipe Conditions | General Observation of Problem | Detailed Defects Tied to Rehab Plan | Documented & Graded |
| Access Points | Not Addressed | Every Access Point Identified | Rarely Documented |
| Diameter & Footage | Inaccurate & Not Calibrated | Verified & Calibrated | Typical Noted |
| Result | A Reason to Act | A Proposal With Nothing Assumed | Condition Grade of Pipes |
Who It Is For
Built for the Buildings You Operate
The R3 is performed on in-building drain, waste, and vent systems for non-residential properties.
- Commercial & Retail
- Hospitality & Healthcare
- Institutional & Education
- Multi-Unit & HOA
Homeowner? Start with a residential inspection.
- 10M+
- Feet of Pipe Experience
- 20+
- Years in Business
- 200+
- Years of Team Expertise
Start With an R3.
Tell us about the building and we will scope the assessment.
solutions@southeastservices.com · 772.226.7416
Done Right. On Time. On Budget.