Condition Assessment
Complete Assessment of Every Sewer or Storm Asset for Informed Decision Making on Lifecycle & Rehabilitation Planning.
Condition Assessment
Services Offered
- 01
Pipeline & Structure Inspection
Inspections completed to national standards for a defensible record of asset condition.
- 02
In-Building Pipeline Inspection
Condition of the drain, waste, and vent piping inside and beneath the building.
- 03
GIS &
Pipeline MappingGPS-located asset records that tie condition data to a map you can plan from.
- 04
Smoke
TestingSurface inflow-source detection that a camera inside the pipe cannot reveal.
Definition
What It Is
Asset condition assessment is the documented inspection and grading of the actual condition, using video, sensors, and standardized defect coding. It is the evidence base for every sound rehabilitation decision. Before you can plan a repair, finance a capital project, or satisfy a regulator, you need verified data on what is actually happening inside the system. We assess sanitary sewer, stormwater, and building pipe systems and deliver findings coded to national standards, so the results are defensible, comparable, and ready to act on.
Method
How We Do It
- Step 01
Define The Objective
We scope the assessment to your needs for compliance, capital planning, acceptance, or troubleshooting.
- Step 02
Access & Clean
Accurate inspection requires a clear line; we coordinate any cleaning required to see true condition.
- Step 03
Use The Right Tool
CCTV, multi-sensor, manhole, lateral, or in-building inspection matched to the asset to get the data you need.
- Step 04
Code To Standard
Defects are coded to national standards, so findings are objective and comparable to give you defensible data.
- Step 05
Decision-Ready Data
Reports with verified results and defensible data to make informed maintenance and rehabilitation decisions.
Engineering
Capabilities & Specs
- Asset Types
- Sanitary SewerStormwaterLateralsManholesBuilding/In-Wall PipeRelated Structures
- Inspection Methods
- CCTVMulti-SensorSmoke TestingSpecialized Methods
- Diameter Range
- 2" to 102"
- Coding Standards
- All Applicable NASSCO StandardsCustom Solutions for Unique Needs
- Deliverable Formats
- Comprehensive ReportsHD Video FilesSite PhotosClient Specific Requirements
Answers
Frequently Asked Questions
PACP is the national standard for describing and grading pipe defects from CCTV inspection. It turns subjective observations into consistent codes and condition ratings, so results are objective, comparable across projects, and accepted by engineers and regulators.
Often, yes. Debris, roots, or grease can hide defects and produce an inaccurate assessment. We determine what cleaning, if any, is needed to see true condition, and coordinate it as part of the work.
Condition assessment documents the physical state of the pipe. An SSES is a broader study that combines inspection methods to locate and quantify infiltration and inflow (I&I) across a system. Assessment is often a component of an SSES.
Properly coded, standards-based assessment data supports common Florida obligations, including collection system action plans under Rule 62-600.705 and MS4 stormwater inspection and reporting.
A NASSCO-coded report with defect grading, high-definition video, and mapping/location data where specified, prioritized so you can move directly into planning or reporting.
Yes. We assess sanitary sewer, stormwater, laterals, manholes, and building/in-wall systems.
Get Started
Connect with a Solutions Specialist
Field-Grounded Answers About Your System, Not a Sales Pitch.